topic Re: disable http not working? in Community and Online Support Services

disable http not working?

david_l — Mon, 07 Jun 2021 21:04:50 GMT

SSH@ICX7150-C12 Router(config)#show web

HTTP server status: Enabled
HTTPS server status: Enabled
No web connection.
SSH@ICX7150-C12 Router(config)#no web-management http
SSH@ICX7150-C12 Router(config)#show web

HTTP server status: Enabled
HTTPS server status: Enabled
No web connection.

Re: disable http not working?

brian_powers — Tue, 08 Jun 2021 12:51:21 GMT

What version of code is on the switch? When I do the same w/08.0.95cT211, the output shows as expected.

SH@BPs-Lab-C12P#conf t

SSH@BPs-Lab-C12P(config)#web-management http

SSH@BPs-Lab-C12P(config)#show web

HTTP server status: Enabled

HTTPS server status: Enabled

No web connection.

SSH@BPs-Lab-C12P(config)#no web-management http

SSH@BPs-Lab-C12P(config)#show web

HTTP server status: Disabled

HTTPS server status: Enabled

No web connection.

SSH@BPs-Lab-C12P(config)#

Re: disable http not working?

david_l — Tue, 08 Jun 2021 18:08:29 GMT

Thanks for reply

running 08.0.92bT213

I can try upgrading, but this seems like a pretty basic command. Just thought I was missing something.

Re: disable http not working?

brian_powers — Tue, 08 Jun 2021 18:10:50 GMT

Hmm. That's a rather new version itself. Might be worth going back through the release notes to see if this was called out as an issue and fixed. If I can find time, I'll see if I can replicate your issue on your code ver too.

Re: disable http not working?

DoubleB — Tue, 16 May 2023 17:31:13 GMT

This is a bit late, but if someone else has this issue use the serial interface and first turn off all web access then turn on only the https access. It worked for me when I had this issue. Oh, and before you do this you must create a certificate, or this will not work.

SSH@ICX7150-C12 Router(config)#no web-management
SSH@ICX7150-C12 Router(config)#web-management https

HTTP server status: Disabled
HTTPS server status: Enabled