topic Re: Where do you reboot your SmartZone 100 sz100? in Community and Online Support Services

Where do you reboot your SmartZone 100 sz100?

brian_koomen — Tue, 14 Nov 2017 19:06:49 GMT

I have been all over the interface and still cannot locate a place where you can click on a button that will reboot the smartzone 100.

SZ100 firmware is: 3.5.0.0.832

Thought it used to be under the user icon at the top right of the screen, but it's not there anymore.

I can always yank the power cord out but did not want to do that.

Any help would be appreciated.

Re: Where do you reboot your SmartZone 100 sz100?

michael_brado — Tue, 14 Nov 2017 19:14:45 GMT

The CLI command is "reload".

Re: Where do you reboot your SmartZone 100 sz100?

brian_koomen — Tue, 14 Nov 2017 19:16:03 GMT

No GUI option to reboot/reload the unit?

Are you telling me the only way to reboot the SZ100 is through the CLI?

Re: Where do you reboot your SmartZone 100 sz100?

michael_brado — Tue, 14 Nov 2017 23:58:37 GMT

There is also a hardware on/off switch, next to where you would yank out the power cord to reboot it.

Re: Where do you reboot your SmartZone 100 sz100?

mitchell_axtell — Wed, 15 Nov 2017 03:55:18 GMT

It's in the cluster menu- System > Cluster > Click on the controller > Restart just above.

Re: Where do you reboot your SmartZone 100 sz100?

brian_koomen — Wed, 15 Nov 2017 13:14:04 GMT

Thanks.

Under Cluster??? Hmmm. Interesting place for it to be located.

Re: Where do you reboot your SmartZone 100 sz100?

mitchell_axtell — Thu, 16 Nov 2017 04:09:39 GMT

It's not a bad place when you consider that it allows you to reboot other member controllers without logging into them directly. The SZ is a lot more aware of other devices than ZDs were.

Re: Where do you reboot your SmartZone 100 sz100?

brian_koomen — Thu, 16 Nov 2017 15:46:27 GMT

Very true. Guess I am still getting use to the new interface.

Re: Where do you reboot your SmartZone 100 sz100?

stephen_hall_60 — Sat, 21 Jul 2018 22:49:10 GMT

can anyone point out where this is (reboot) in vSZ web interface? tks

Re: Where do you reboot your SmartZone 100 sz100?

mitchell_axtell — Mon, 23 Jul 2018 02:17:56 GMT

Which vSZ- E or H? If an E, what version?

Re: Where do you reboot your SmartZone 100 sz100?

pasquale_monard — Mon, 28 Oct 2019 18:16:40 GMT

if it is an H version, there is no reload in the webui because of the nature of H means. Since it is geared towards MSPs, you do not necessarily want to reboot an entire controller or cluster when hosting multiple customers.

For E, it is under System - Cluster

Re: Where do you reboot your SmartZone 100 sz100?

dennis_davis — Tue, 18 Jan 2022 18:36:25 GMT

@mitchell_axtell spent 10 minutes looking for this. Thank you!

Re: Where do you reboot your SmartZone 100 sz100?

eizens_putnins — Thu, 27 Jan 2022 08:19:34 GMT

It is completely logical place for reboot function to be, as it is a cluster operation. Normally you don't need to reboot SZ, anyway.