topic rkscli: in Community and Online Support Services

rkscli:

navjotsingh153 — Tue, 02 Aug 2022 08:28:43 GMT

rkscli:

I am trying to login at ruckus cli and getting only this option

not able to go in enable mode or config mode

only rkscli: this is showing after login and no commands are working

rkscli: showSorry, no match to show found

rkscli: shoSorry, no match to sho found

rkscli:

Re: rkscli:

Vineet_nejwala — Tue, 02 Aug 2022 09:54:13 GMT

Hi @navjotsingh153

The rkscli commands for AP would be "get". For example below few :

Commands starting with 'get' :
get 802.11-h : get 802.11-h <wifi name>
-- Get 802.11h status
get aaa : get aaa
-- Display AAA settings
get aaa-vlan-override : get aaa-vlan-override <wlan name>
-- Display AP WLAN's AAA VLAN override
get acl : get acl <wlan name> mac -- Show the MAC access-control info of the wlan interface
get aiming : get aiming
-- Display Aiming Configuration
get airtime : get airtime <wifi name> {noreset|[reset]} [raw]
-- Get airtime utilization statistics
get ap-bridge : get ap-bridge <wlan name>
-- Display AP WLAN's wireless bridge mode
get ap-mode : get ap-mode
-- Show AP Operational Mode
get ap2ap_dormant : get ap2ap_dormant
-- Show ap2ap_dormant
get assoc_rssi_thr : get assoc_rssi_thr <wlan name>
-- Get Assoc Request RSSI Threshold (dBm)
get assoc_snr_thr : get assoc_snr_thr <wlan name>
-- Get Assoc Request SNR Threshold (dB)
get atf : get atf <wlan name>

Best Regards

Vineet

Re: rkscli:

navjotsingh153 — Tue, 02 Aug 2022 09:56:18 GMT

@Vineet_nejwala Thanks for your reply Vineet. how to get help command like ? in other network devices.

Re: rkscli:

Vineet_nejwala — Tue, 02 Aug 2022 09:58:42 GMT

@navjotsingh153

You can type help, followed by a tab and all commands would be visible.

rkscli: help

Best Regards

Vineet