Send command via plink.exe Ruckus R510

manuel_voutat — Wed, 10 May 2017 09:31:34 GMT

Hello,

I used plink.exe to communicate with the AccessPoint, R510.
I needed to send commands directly with the plink line command :

plink.exe -ssh -2 -noagent -batch -pw ruckus -l Ruckus 192.168.2.5 -P 22 [Commands]

But Ruckus ask a second time the login and the password which making it impossible.

Are there any solution to remove the second authentification?
Are there any other way to send commands by a single command line from terminal?

Re: Send command via plink.exe Ruckus R510

martin_martin — Wed, 10 May 2017 14:29:40 GMT

Hi, Manual,
Sorry we cannot remove the second authentification.
Maybe you can talk to the maker of plink to adjust its program.

What commands are you planning to send ? cause you post in Zonedirector forum, but send commands to single AP ?

regards
Martin

topic Re: Send command via plink.exe Ruckus R510 in Community and Online Support Services

Send command via plink.exe Ruckus R510

Re: Send command via plink.exe Ruckus R510