https://community.ruckuswireless.com/t5/Community-and-Online-Support/Can-I-change-the-AP-mode-via-CLI-from-ZD-mode-to-standalone/m-p/29100#M1199 <P style="margin: 0;">Hi!</P> <P style="margin: 0;">We have deployed a bunch of standalone 7363 APs at a remote site without ZD. We thought that all APs were correctly configured, however, one is still in ZD mode. No remote connection to GUI possible, but I can remotely login via SSH. Is there any CLI command which can use to change the AP to standalone mode? I would like to avoid another journey to this site - it's quite a bit to drive ...</P> <P style="margin: 0;"></P> <P style="margin: 0;">Thanks in advance, regards,</P> <P style="margin: 0;"></P> <P style="margin: 0;">Volker</P> Thu, 27 May 2021 19:09:42 GMT volker_werbus 2021-05-27T19:09:42Z https://community.ruckuswireless.com/t5/Community-and-Online-Support/Can-I-change-the-AP-mode-via-CLI-from-ZD-mode-to-standalone/m-p/29100#M1199 <P style="margin: 0;">Hi!</P> <P style="margin: 0;">We have deployed a bunch of standalone 7363 APs at a remote site without ZD. We thought that all APs were correctly configured, however, one is still in ZD mode. No remote connection to GUI possible, but I can remotely login via SSH. Is there any CLI command which can use to change the AP to standalone mode? I would like to avoid another journey to this site - it's quite a bit to drive ...</P> <P style="margin: 0;"></P> <P style="margin: 0;">Thanks in advance, regards,</P> <P style="margin: 0;"></P> <P style="margin: 0;">Volker</P> Thu, 27 May 2021 19:09:42 GMT https://community.ruckuswireless.com/t5/Community-and-Online-Support/Can-I-change-the-AP-mode-via-CLI-from-ZD-mode-to-standalone/m-p/29100#M1199 volker_werbus 2021-05-27T19:09:42Z https://community.ruckuswireless.com/t5/Community-and-Online-Support/Can-I-change-the-AP-mode-via-CLI-from-ZD-mode-to-standalone/m-p/29101#M1200 <P style="margin: 0;">To reset:</P> <P style="margin: 0;">set factory</P> <P style="margin: 0;">reboot</P> <P style="margin: 0;"></P> <P style="margin: 0;">To enable web access:</P> <P style="margin: 0;">set https enable</P> <P style="margin: 0;">set http enable</P> <P style="margin: 0;"></P> Fri, 28 May 2021 12:59:18 GMT https://community.ruckuswireless.com/t5/Community-and-Online-Support/Can-I-change-the-AP-mode-via-CLI-from-ZD-mode-to-standalone/m-p/29101#M1200 david_black_594 2021-05-28T12:59:18Z