https://community.ruckuswireless.com/t5/Cloudpath-Enrollment-System-ES/Cloudpath-having-the-capability-of-doing-a-time-profile-for/m-p/12692#M36 It would be an amazing feature if you could setup a time profile in Cloudpath. Basically the idea or premise is, that you have two workflows. One workflow is active during x hours, then the other would be active during y hours. <BR /><BR />The way we are getting around this currently is, we created two WLANS on the vSZ (which has a time profile) and pointing each to a different workflow. If this was done in Cloudpath, the connected clients wouldn't get booted once the changeover occurs. Fri, 05 Jan 2018 22:40:24 GMT eightohtwoeleve 2018-01-05T22:40:24Z https://community.ruckuswireless.com/t5/Cloudpath-Enrollment-System-ES/Cloudpath-having-the-capability-of-doing-a-time-profile-for/m-p/12692#M36 It would be an amazing feature if you could setup a time profile in Cloudpath. Basically the idea or premise is, that you have two workflows. One workflow is active during x hours, then the other would be active during y hours. <BR /><BR />The way we are getting around this currently is, we created two WLANS on the vSZ (which has a time profile) and pointing each to a different workflow. If this was done in Cloudpath, the connected clients wouldn't get booted once the changeover occurs. Fri, 05 Jan 2018 22:40:24 GMT https://community.ruckuswireless.com/t5/Cloudpath-Enrollment-System-ES/Cloudpath-having-the-capability-of-doing-a-time-profile-for/m-p/12692#M36 eightohtwoeleve 2018-01-05T22:40:24Z