topic Re: Ruckus R500 not converting to cloud in RUCKUS Cloud

Ruckus R500 not converting to cloud

johan_castro_a — Tue, 15 Mar 2022 18:14:23 GMT

I have a couple of R500 that are not going to the cloud. I removed them from my ZD, factory reset them, added serial numbers into the cloud portal, software version is the solo 110.0.0.0.2005. I have waited 24 hours and the APs have not contacted the cloud. Rebooted from then web interface, disabled and re-enabled the port on the switch. Still nothing. Any help would be appreciated.

Thanks.

Re: Ruckus R500 not converting to cloud

DarrelRhodes — Tue, 12 Apr 2022 15:51:43 GMT

Hi Johan,

Have you tried a factory reset after you uploaded the 110.0.0.0.2005 software on to them?

You should be able to raise a ticket with Ruckus Support to get this looked at, as the Ruckus Cloud license includes Watchdog end-user support.

Hope that helps,
Darrel.

Re: Ruckus R500 not converting to cloud

johan_castro_a — Tue, 12 Apr 2022 15:58:12 GMT

Thank you! we issued a new AP certificate and that fixed it.

Re: Ruckus R500 not converting to cloud

DarrelRhodes — Tue, 12 Apr 2022 16:00:32 GMT

Fantastic! I did suspect it might be a certificate issue, if it wasn't the above.