https://community.ruckuswireless.com/t5/China-%E7%AE%80%E4%BD%93%E4%B8%AD%E6%96%87/ICX-08095e%E5%92%8CICX08095f%E7%89%88%E6%9C%AC%E5%8F%91%E5%B8%83-%E6%9D%A5%E7%9C%8B%E7%9C%8B%E8%A7%A3%E5%86%B3%E4%BA%86%E5%93%AA%E4%BA%9B%E9%97%AE%E9%A2%98/m-p/38305#M20 <P style="margin: 0;">&nbsp;</P> <P style="margin: 0;">ICX 08095e &amp; 08095f版本主要说明摘要</P> <OL> <LI>没有新增功能</LI> <LI>缺省开启SSH。缺省用户名和密码. super/sp-admin</LI> <LI>解决的主要Bug问题：</LI> <LI>08095f解决的主要Bug问题 <OL> <LI>FI-250749：After adding and executing batch file, the standby unit reloads unexpecetdly.</LI> <LI>FI-250969：Upgrade from 8090 to 8095 and ICX will be losing connectivity to devices whose arp entries are configured statically with static ARP inspection feature turned on. <OL> <LI>Work around: Remove the authentication source-guard-protection enable at the interface level and add thesource-guard to the VLAN and do source-guard binding</LI> </OL></LI> <LI>08095e解决的主要Bug问题 <OL> <LI>The standby unit reloads unexpectedly when "no ip dhcp-client enable" command is run[FI-249102].</LI> <LI>ICX7550 / ICX7650 / ICX7850 port connected to VDX will be down when connected with 1G SFP[FI-202413]</LI> <LI>After adding the VLAN on an interface, the Port state changed to blocking[FI-241626]</LI> <LI>FI-243073: Outbound SCP session may kill the SSH session that it was initiated from</LI> <LI>FI-235801: In switch mode, ICX management VLAN outband interface might broken after system reloading</LI> <LI>FI-239069: port microflaps on connecting to ICX7150-stack retimer ports (1/3/4 or 2/3/4)</LI> <LI>FI-250280: User may experience that the end devices get IP address [through DHCP or otherwise] but cannot reach the internet and devices on local network</LI> <LI>FI-225203: ICX port might be stuck in down state after peer Cisco device port flap</LI> </OL></LI> </OL></LI> </OL> <P style="margin: 0;">&nbsp;</P> <P style="margin: 0;">&nbsp;具体参见： <A href="https://support.ruckuswireless.com/documents/4061-ruckus-icx-fastiron-08-0-95f-ga-release-notes" target="_blank" rel="noopener noopener noreferrer">https://support.ruckuswireless.com/documents/4061-ruckus-icx-fastiron-08-0-95f-ga-release-notes</A></P> <P style="margin: 0;"></P> <P style="margin: 0;">Thanks</P> <P style="margin: 0;">Nick</P> <P style="margin: 0;">&nbsp;</P> <P style="margin: 0;">&nbsp;</P> <P style="margin: 0;">&nbsp;</P> <P style="margin: 0;"></P> Sat, 25 Dec 2021 14:16:19 GMT nick_nie 2021-12-25T14:16:19Z https://community.ruckuswireless.com/t5/China-%E7%AE%80%E4%BD%93%E4%B8%AD%E6%96%87/ICX-08095e%E5%92%8CICX08095f%E7%89%88%E6%9C%AC%E5%8F%91%E5%B8%83-%E6%9D%A5%E7%9C%8B%E7%9C%8B%E8%A7%A3%E5%86%B3%E4%BA%86%E5%93%AA%E4%BA%9B%E9%97%AE%E9%A2%98/m-p/38305#M20 <P style="margin: 0;">&nbsp;</P> <P style="margin: 0;">ICX 08095e &amp; 08095f版本主要说明摘要</P> <OL> <LI>没有新增功能</LI> <LI>缺省开启SSH。缺省用户名和密码. super/sp-admin</LI> <LI>解决的主要Bug问题：</LI> <LI>08095f解决的主要Bug问题 <OL> <LI>FI-250749：After adding and executing batch file, the standby unit reloads unexpecetdly.</LI> <LI>FI-250969：Upgrade from 8090 to 8095 and ICX will be losing connectivity to devices whose arp entries are configured statically with static ARP inspection feature turned on. <OL> <LI>Work around: Remove the authentication source-guard-protection enable at the interface level and add thesource-guard to the VLAN and do source-guard binding</LI> </OL></LI> <LI>08095e解决的主要Bug问题 <OL> <LI>The standby unit reloads unexpectedly when "no ip dhcp-client enable" command is run[FI-249102].</LI> <LI>ICX7550 / ICX7650 / ICX7850 port connected to VDX will be down when connected with 1G SFP[FI-202413]</LI> <LI>After adding the VLAN on an interface, the Port state changed to blocking[FI-241626]</LI> <LI>FI-243073: Outbound SCP session may kill the SSH session that it was initiated from</LI> <LI>FI-235801: In switch mode, ICX management VLAN outband interface might broken after system reloading</LI> <LI>FI-239069: port microflaps on connecting to ICX7150-stack retimer ports (1/3/4 or 2/3/4)</LI> <LI>FI-250280: User may experience that the end devices get IP address [through DHCP or otherwise] but cannot reach the internet and devices on local network</LI> <LI>FI-225203: ICX port might be stuck in down state after peer Cisco device port flap</LI> </OL></LI> </OL></LI> </OL> <P style="margin: 0;">&nbsp;</P> <P style="margin: 0;">&nbsp;具体参见： <A href="https://support.ruckuswireless.com/documents/4061-ruckus-icx-fastiron-08-0-95f-ga-release-notes" target="_blank" rel="noopener noopener noreferrer">https://support.ruckuswireless.com/documents/4061-ruckus-icx-fastiron-08-0-95f-ga-release-notes</A></P> <P style="margin: 0;"></P> <P style="margin: 0;">Thanks</P> <P style="margin: 0;">Nick</P> <P style="margin: 0;">&nbsp;</P> <P style="margin: 0;">&nbsp;</P> <P style="margin: 0;">&nbsp;</P> <P style="margin: 0;"></P> Sat, 25 Dec 2021 14:16:19 GMT https://community.ruckuswireless.com/t5/China-%E7%AE%80%E4%BD%93%E4%B8%AD%E6%96%87/ICX-08095e%E5%92%8CICX08095f%E7%89%88%E6%9C%AC%E5%8F%91%E5%B8%83-%E6%9D%A5%E7%9C%8B%E7%9C%8B%E8%A7%A3%E5%86%B3%E4%BA%86%E5%93%AA%E4%BA%9B%E9%97%AE%E9%A2%98/m-p/38305#M20 nick_nie 2021-12-25T14:16:19Z