Ruckus ICX 7150-48

Judomuerte — Fri, 11 Jul 2025 12:32:25 GMT

I've recently purchased a ICX 7150-48ZP and I'm unable to log into the webgui with username and password (can ssh fine). Online queries seem to indicate that I would need a layer 3 license. Am I screwed? I would love full functionality as I currently own a very expensive standard switch. SPR08095sufi is the latest firmware I've installed. Any help, or a point in the right direction would be very much appreciated.

Re: Ruckus ICX 7150-48

Yarenis — Fri, 03 Oct 2025 19:03:14 GMT

Hi @Judomuerte,

The user for SSH and Web must be the same, unless it has been changed. Let me provide a few commands that will enable Web access and ensure the same credentials used for local SSH access are enabled for WEB access.

Check if Web access is enabled:
show web

Verify that the local credentials are the ones used to authenticate Web access:

show run | include aaa
You should see the following result:

aaa authentication web-server default local

If you don’t see this output, configure it so that the credentials used for Web access are the local ones:

configure terminal

aaa authentication web-server default local

write memory

Support documentation
Configuring Web Access

https://docs.commscope.com/bundle/fastiron-10020-managementguide/page/GUID-F4B3233B-B04D-4BF7-A0CE-A18E459214B2.html

aaa authentication web-server

https://docs.commscope.com/bundle/fastiron-08095-commandref/page/GUID-E60DB55B-5E68-40EC-A999-73C6C071EFF7.html

Best regards,

Yarenis Hernández.

Technical Support Engineer | L2 TAC Wired

COMMSCOPE

now meets next

10:00 AM to 7:00 PM MDT | Sun& Mon- Off

Have a question or need to escalate“Chat Now”

RICXI|RCNA|CCNA|

topic Re: Ruckus ICX 7150-48 in Admin and Licensing

Ruckus ICX 7150-48

Re: Ruckus ICX 7150-48

Configuring Web Access

aaa authentication web-server