topic Re: wpa authentication on ap site in Access Points - Indoor and Outdoor

wpa authentication on ap site

bernd_biskupek_ — Fri, 03 May 2019 08:19:00 GMT

Hello everybody, we had an big outage when our ZD lost power for a while. All client devices lost connection and were not able to connect to wifi again. For me it seems to be the problem that the client will be authenticated from the ZD for the SSID and the ZD was not available. Is there an configuration possibility where the AP can authenticate an WPA SSID and the client can connect to the wifi? Thanks a lot for you help in advance.

Re: wpa authentication on ap site

abilashpr — Fri, 03 May 2019 17:23:58 GMT

Hi BBI,

Please configure WLANs as "Autonomous WLAN", but please note that they have certain limitations please refer User Guide ( Page No. 69, ZoneDirector 10.2 User Guide ) before configuring them as Autonomous WLAN.

Regards,
Abilash PR.

Re: wpa authentication on ap site

krishan_parasha — Sat, 04 May 2019 02:23:00 GMT

Yes configure autonomous mode in that said

Re: wpa authentication on ap site

bernd_biskupek_ — Mon, 06 May 2019 06:44:49 GMT

Thanks for your help! I think that is what i searched for.