https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/how-long-does-Ruckus-M510-update-firmweare-take/m-p/34385#M9738 Did you up date to 200.7.10.X.... I would go back to 200.6.10.x which will reset to all default settings? By any chance you saved the settings before you updated do might be able to restore settings.? Sun, 22 Sep 2019 22:27:24 GMT hayward_kong 2019-09-22T22:27:24Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/how-long-does-Ruckus-M510-update-firmweare-take/m-p/34383#M9736 I update firmware from local file. It automatically reboot, then the CTL led blink 2 time per seond for about half an hour. Is it proper? Sun, 22 Sep 2019 16:22:25 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/how-long-does-Ruckus-M510-update-firmweare-take/m-p/34383#M9736 jasmine_gu 2019-09-22T16:22:25Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/how-long-does-Ruckus-M510-update-firmweare-take/m-p/34384#M9737 I had that happen to me on unleashed firmware 200.7.10.x on a r710. Did you try rebooting it. Power cycle it? Next try a factory reset on the access point with the paper clip for 10 sec or so... Sun, 22 Sep 2019 22:24:29 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/how-long-does-Ruckus-M510-update-firmweare-take/m-p/34384#M9737 hayward_kong 2019-09-22T22:24:29Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/how-long-does-Ruckus-M510-update-firmweare-take/m-p/34385#M9738 Did you up date to 200.7.10.X.... I would go back to 200.6.10.x which will reset to all default settings? By any chance you saved the settings before you updated do might be able to restore settings.? Sun, 22 Sep 2019 22:27:24 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/how-long-does-Ruckus-M510-update-firmweare-take/m-p/34385#M9738 hayward_kong 2019-09-22T22:27:24Z