topic Re: Overlapped Subnet IP range in Access Points - Indoor and Outdoor

Overlapped Subnet IP range

petar_pisnjak — Wed, 27 Jul 2016 06:56:10 GMT

I am having problem with Ruckus R710 Subnet configuration:

I have configured Local Subnet 1 with following:

Enabled
Local IP: 192.168.40.1
Mask: 255.255.255.0
DHCP: Enabled
Starting Address: 192.168.40.10
Maximum DHCP Users: 240
Access VLAN: 40

When I try to configure Local Subnet 2 with following:

Enabled
Local IP: 192.168.50.1
Mask: 255.255.255.0
DHCP: Enabled
Starting Address: 192.168.50.10
Maximum DHCP Users: 240
Access VLAN: 50

I get message:
Overlapped Subnet IP range

But I cannot understand why would it be? I have even tried further spread subnets like: 192.169.50.1 or something else, but still get same message...

Re: Overlapped Subnet IP range

martin_martin — Wed, 27 Jul 2016 08:30:55 GMT

Hi Petar,

Which software are you running on the R710 ?

Kind regards
Martin

Re: Overlapped Subnet IP range

petar_pisnjak — Wed, 27 Jul 2016 08:48:17 GMT

Software Version: 100.2.0.0.336

Re: Overlapped Subnet IP range

hussam_abuqamar — Thu, 28 Jul 2016 03:52:10 GMT

I am having same issue; On contrary R700 is stable and allow me to do this.
I think this is a bug that has been for a while in R710 and not taken care of.

Re: Overlapped Subnet IP range

antonio_s_bakmk — Fri, 27 Jan 2017 00:20:30 GMT

do you solved this problem ?

Re: Overlapped Subnet IP range

petar_pisnjak — Fri, 27 Jan 2017 07:06:16 GMT

No, changed to bridge mode so dont need it anymore

Re: Overlapped Subnet IP range

hussam_abuqamar — Fri, 27 Jan 2017 07:16:20 GMT

Just updated the firmware and worked fine since then

Re: Overlapped Subnet IP range

antonio_s_bakmk — Fri, 27 Jan 2017 19:43:43 GMT

Thankyou, I upgrade to version 104.0.0.0.1347 and works excelent !