topic Re: vSZ- Rebooting all APs at once in Access Points - Indoor and Outdoor

vSZ- Rebooting all APs at once

stefany_pineda — Fri, 27 Aug 2021 18:04:34 GMT

Is there a way to reboot ALL AP's at once, or to reboot ALL "model AP" at once?

Hi, i have the next issue,

Controller: virtual smart zone with two zones: 5.2.1.0.515 and 3.6.2

issue: all ZF7982 in zone 3.6.2 report high cpu utilización (98%-100%), when our prtg shoot the alarm "cpu 100%", the ap (randomly) presents in "Access point-events"----->"heartbeat loss", then, ap "disconnect"

ping to IP ( ap "disconnected") is ok

my ssh loging is slow

we have 200 ap zf7982, i want to reboot all aps at once, is it possible? how can i do it?

Abs.

Re: vSZ- Rebooting all APs at once

DarrelRhodes — Mon, 30 Aug 2021 10:07:29 GMT

Hi Abs,

Have you seen this thread? Looks like it may/may not work if you are running SZ 5.1 or newer:

https://forums.ruckuswireless.com/conversations/access-points/is-there-a-way-to-reboot-all-r710s-at-once/5f91c3db135b77e2478b261b

Best,
Darrel.

Re: vSZ- Rebooting all APs at once

naresh_kumar_74 — Mon, 30 Aug 2021 10:27:19 GMT

Hello Abs,

The below AP CLI script commands are blacklisted from 5.1 and above software releases.

reboot
set factory
set scg reset
set scg init
set scg ip
set scg disable/enable
set hub disable/enable
set interface
set password
set login

We have the below command to reboot individual Aps.

ruckus# reload ap <MAC address of the AP>

Hope this helps.

Regards,

Naresh Kumar

Re: vSZ- Rebooting all APs at once

stefany_pineda — Mon, 30 Aug 2021 12:58:38 GMT

@naresh_kumar_7493781 so gratefull!

thanks,

i applied the next ap cli in format .kps

_________________________

model=ZF7982

reboot now

_________________________

To execute i selected in system- the 3.6 zone.

🙂

Re: vSZ- Rebooting all APs at once

stefany_pineda — Mon, 30 Aug 2021 13:01:00 GMT

@darrel_rhodes

thanks!!! actually.. it works! with virtual smart zone V5.2.1

Re: vSZ- Rebooting all APs at once

naresh_kumar_74 — Wed, 01 Sep 2021 10:01:57 GMT

Hello Stefany,

Glad to know that it worked.

Regards,

Naresh Kumar

Re: vSZ- Rebooting all APs at once

zinker518 — Tue, 17 May 2022 12:56:03 GMT

Has any of this been tested on vSZ-E 6.1.0.0.935?

Would rebooting the controller cause the AP's to reboot?

Thanks,

zinker

Re: vSZ- Rebooting all APs at once

syamantakomer — Fri, 29 Jul 2022 21:11:37 GMT

Hi Zinker,

Yes, process provided above should work in 6.1.0 as well.

Rebooting controller will not reboot the APs.

Re: vSZ- Rebooting all APs at once

jzsjr — Wed, 30 Nov 2022 19:40:07 GMT

Reboot says it is a blacklist command like Naresh mentioned. Is anyone using the command in SZ 6.1 successfully despite it being blacklisted?

Re: vSZ- Rebooting all APs at once

jzsjr — Wed, 30 Nov 2022 19:50:04 GMT

Sorry, I did not load "more replies," to see Zinker518 and moderators reply.