https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Cisco-VTP-support-over-P300-wireless-bridge/m-p/32891#M9173 Does anyone know if VTP is supported over the wireless bridge? I am new to Ruckus products and just purchased a pair of P300 radios to extend our network. The radios are connected to 2 Cisco switches which also provide PoE for the radios. The bridge is up and forwarding traffic to the far end switch using a dot1q trunk. However, I don't see VTP advertisements going across to the far end switch. Is VTP not supported? I can work around the problem by defining vlans locally on the switch but I would prefer to not have to do this. Thu, 28 Jan 2016 21:32:34 GMT eaton_siy 2016-01-28T21:32:34Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Cisco-VTP-support-over-P300-wireless-bridge/m-p/32891#M9173 Does anyone know if VTP is supported over the wireless bridge? I am new to Ruckus products and just purchased a pair of P300 radios to extend our network. The radios are connected to 2 Cisco switches which also provide PoE for the radios. The bridge is up and forwarding traffic to the far end switch using a dot1q trunk. However, I don't see VTP advertisements going across to the far end switch. Is VTP not supported? I can work around the problem by defining vlans locally on the switch but I would prefer to not have to do this. Thu, 28 Jan 2016 21:32:34 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Cisco-VTP-support-over-P300-wireless-bridge/m-p/32891#M9173 eaton_siy 2016-01-28T21:32:34Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Cisco-VTP-support-over-P300-wireless-bridge/m-p/32892#M9174 I am looking for the same answer, i have 2 pairs of P300's now that this issue resides on. Wed, 29 Jun 2016 20:16:21 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Cisco-VTP-support-over-P300-wireless-bridge/m-p/32892#M9174 samuel_acosta_j 2016-06-29T20:16:21Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Cisco-VTP-support-over-P300-wireless-bridge/m-p/32893#M9175 Contact Ruckus Tech Support and request the patch for ER-3592: P300 ptp <BR /> backhaul not passing VTP between Cisco VLAN Trunk Protocol enabled <BR /> switches. (KBA-5872) Thu, 30 Jun 2016 23:47:40 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Cisco-VTP-support-over-P300-wireless-bridge/m-p/32893#M9175 michael_brado 2016-06-30T23:47:40Z