https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-t-get-a-unleashed-T710-to-sync-to-a-T710-Unleashed-Master/m-p/31803#M8924 Yes, it does have the current release of the Unleashed code. We bought the T710 as Unleashed units to start with. I would have expected possible issues with the T610 since we had to Unleash them. I can login to the units after a factory reset as a standalone unit. As soon as I connect it to the PoE switch to get back to the Master AP, the issue starts all over again. Mon, 18 Mar 2019 12:43:11 GMT david_wagner_4y 2019-03-18T12:43:11Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-t-get-a-unleashed-T710-to-sync-to-a-T710-Unleashed-Master/m-p/31801#M8922 So I have 2 Unleashed T710's that I am trying to get working with another Unleashed T710 that is setup as a master. Firmware is up to date on all 3 units. I have factory reset the units, but once it gets the info from the master, it reboots and keeps rebooting (red power light, then it flashes green for a second, then off and starts over again). I have also connected 2 Unleashed T610's with no issues. The Master T710 is powered by a PoE injector, the out is going to a CISCO PoE switch, that powers all of the other units. I have 12 more T710's on order to be used for a music festival and I have to get this figured out. Fri, 15 Mar 2019 20:53:40 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-t-get-a-unleashed-T710-to-sync-to-a-T710-Unleashed-Master/m-p/31801#M8922 david_wagner_4y 2019-03-15T20:53:40Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-t-get-a-unleashed-T710-to-sync-to-a-T710-Unleashed-Master/m-p/31802#M8923 Try connecting to the problem T710 by itself, off the LAN.&nbsp; Is it responding after factory default, allowing super/sp-admin 192.168.0.1 GUI login if you've pre-configured your AP in 192.168.0.x?&nbsp; I wonder if it's loaded with Unleashed code...? Fri, 15 Mar 2019 21:09:03 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-t-get-a-unleashed-T710-to-sync-to-a-T710-Unleashed-Master/m-p/31802#M8923 michael_brado 2019-03-15T21:09:03Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-t-get-a-unleashed-T710-to-sync-to-a-T710-Unleashed-Master/m-p/31803#M8924 Yes, it does have the current release of the Unleashed code. We bought the T710 as Unleashed units to start with. I would have expected possible issues with the T610 since we had to Unleash them. I can login to the units after a factory reset as a standalone unit. As soon as I connect it to the PoE switch to get back to the Master AP, the issue starts all over again. Mon, 18 Mar 2019 12:43:11 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-t-get-a-unleashed-T710-to-sync-to-a-T710-Unleashed-Master/m-p/31803#M8924 david_wagner_4y 2019-03-18T12:43:11Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-t-get-a-unleashed-T710-to-sync-to-a-T710-Unleashed-Master/m-p/31804#M8925 I am starting to wonder if the firmware update did not go thru all the way on these 2 units? Mon, 18 Mar 2019 17:31:26 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-t-get-a-unleashed-T710-to-sync-to-a-T710-Unleashed-Master/m-p/31804#M8925 david_wagner_4y 2019-03-18T17:31:26Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-t-get-a-unleashed-T710-to-sync-to-a-T710-Unleashed-Master/m-p/31805#M8926 <P alt="" name="" rel="" target="" title="" type="" value="">I setup the alarm function on the master. This is what I am getting when one of the T710 connects to the master T710.&nbsp;</P><P alt="" name="" rel="" target="" title="" type="" value=""><BR alt="" name="" rel="" target="" title="" type="" value="" /></P><P alt="" name="" rel="" target="" title="" type="" value="">An alarm 'AP Has Joined' was triggered.</P> <P alt="" name="" rel="" target="" title="" type="" value="">&nbsp;</P> <P alt="" name="" rel="" target="" title="" type="" value="">Details: </P> <P alt="" name="" rel="" target="" title="" type="" value="">AP[f0:3e:90:1a:dc:a0] joins with uptime [120] s and last disconnected reason [AP Restart : reset button]</P><BR alt="" name="" rel="" target="" title="" type="" value="" /> Mon, 18 Mar 2019 20:09:56 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-t-get-a-unleashed-T710-to-sync-to-a-T710-Unleashed-Master/m-p/31805#M8926 david_wagner_4y 2019-03-18T20:09:56Z