topic Re: Download firmware 3.1.2.0.150 for ZF7343 in Access Points - Indoor and Outdoor

Download firmware 3.1.2.0.150 for ZF7343

ivan_gonzalez_g — Tue, 09 May 2017 17:07:08 GMT

Hello,

There is the possibility of loading a Ruckus ZF7343 AP firwmare 3.1.2.0.150 directly, to be discovered by the VSZ-H controller.

Thank you very much for the help

Re: Download firmware 3.1.2.0.150 for ZF7343

michael_brado — Tue, 09 May 2017 17:23:29 GMT

No, you would load the Solo AP image, 100.1.0.0.432 which can connect to ZDs or SmartZone controllers.
Here's the link: https://support.ruckuswireless.com/software/838-standalone-ap-software-100-1-0-0-432-indoor-aps

Re: Download firmware 3.1.2.0.150 for ZF7343

ivan_gonzalez_g — Wed, 10 May 2017 14:17:08 GMT

Hi,

Thank you very much for the reply.

To connect an AP ZF7343 to the Virtual SmartZone High scale which image could be used? 100.1.0.0.432 Would serve us?

Thanks

Re: Download firmware 3.1.2.0.150 for ZF7343

michael_brado — Fri, 12 May 2017 22:44:13 GMT

Yes, the 100.x Solo AP firmware can join a ZoneDirector or SmartZone controller.

Re: Download firmware 3.1.2.0.150 for ZF7343

michael_brado — Fri, 12 May 2017 22:44:16 GMT

Yes, the 100.x Solo AP firmware can join a ZoneDirector or SmartZone controller.