https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/T710-can-t-be-powered-on-with-802-3at-compatible-switch/m-p/30333#M8479 I flashed the AP to unleashed 200.8 for now. I tried two switches, both support 802.3at, one is ubnt es-8-150W , the other is S5720I-12X-PWH-SI-DC.None of them can power it up. Now I have to use a POE injector for it. Does any one use ubnt or Huawei switch to power it on?<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" /> Sun, 27 Sep 2020 01:42:38 GMT joey_lu 2020-09-27T01:42:38Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/T710-can-t-be-powered-on-with-802-3at-compatible-switch/m-p/30333#M8479 I flashed the AP to unleashed 200.8 for now. I tried two switches, both support 802.3at, one is ubnt es-8-150W , the other is S5720I-12X-PWH-SI-DC.None of them can power it up. Now I have to use a POE injector for it. Does any one use ubnt or Huawei switch to power it on?<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" /> Sun, 27 Sep 2020 01:42:38 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/T710-can-t-be-powered-on-with-802-3at-compatible-switch/m-p/30333#M8479 joey_lu 2020-09-27T01:42:38Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/T710-can-t-be-powered-on-with-802-3at-compatible-switch/m-p/30334#M8480 No problem from my side <BR /> Only issue if ap reports that no enough power - switch power mode to 802.11at directly on ap. Group policy or auto doesn't work with my netgear and zyxel switch Sun, 27 Sep 2020 06:00:34 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/T710-can-t-be-powered-on-with-802-3at-compatible-switch/m-p/30334#M8480 anton_kuzmin 2020-09-27T06:00:34Z