topic Re: I've connected with 802.11ax, but I'm not getting enough speed. in Access Points - Indoor and Outdoor https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-ve-connected-with-802-11ax-but-I-m-not-getting-enough-speed/m-p/29791#M8312 <P style="margin: 0;">Thanks for the reply.</P> <P style="margin: 0;">After writing the article, we are checking various settings.<BR />Let's check what you said together.</P> <P style="margin: 0;">No progress has been made yet,</P> <P style="margin: 0;"></P> <P style="margin: 0;">If it is configured with Wi-Fi6, how much wireless speed is measured in a 2x2:2 terminal?</P> Thu, 10 Jun 2021 05:46:30 GMT JongHaKim_Sangs 2021-06-10T05:46:30Z I've connected with 802.11ax, but I'm not getting enough speed. https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-ve-connected-with-802-11ax-but-I-m-not-getting-enough-speed/m-p/29789#M8310 <P style="margin: 0;">For AP performance test, after wirelessly connecting two laptops to the R730 AP, I configured the server and client. This is a Wi-Fi6 network composed of SZ100 equipment and R730. (SZ100 version is 6.0.0.0.1331</P> <P style="margin: 0;"><BR />I tested it through iperf, but only about 150 Mbps was confirmed. (Measured up to 89Mbps in Samsung Note 10 wireless terminal)</P> <P style="margin: 0;">All laptops use a wireless LAN card that supports 802.11ax.</P> <P style="margin: 0;">Is there any way to get higher speed?</P> <P style="margin: 0;">-&gt; If you look at the status of the SSID connected with netsh wlan show networks mode=bs on a Windows laptop, the supported default speed is 24 mbps, and other speeds are only displayed up to 54 mbps. Is there something I'm missing in the wireless network setup?</P> <P style="margin: 0;">What should I check first?</P> Wed, 09 Jun 2021 03:00:55 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-ve-connected-with-802-11ax-but-I-m-not-getting-enough-speed/m-p/29789#M8310 JongHaKim_Sangs 2021-06-09T03:00:55Z Re: I've connected with 802.11ax, but I'm not getting enough speed. https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-ve-connected-with-802-11ax-but-I-m-not-getting-enough-speed/m-p/29790#M8311 <P style="margin: 0;">Hi Jong,</P> <P style="margin: 0;"></P> <P style="margin: 0;">There could be several things which can cause low data rates.</P> <UL> <LI>Check and make sure WiFi6 is enabled on the SSIDs.</LI> <LI>Check the AP channelization settings, if AP is forced to 20MHz channelization, speed will be less, though it should be way beyond 54mbps.</LI> <LI>Update the driver on the UE device.</LI> </UL> Wed, 09 Jun 2021 14:11:04 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-ve-connected-with-802-11ax-but-I-m-not-getting-enough-speed/m-p/29790#M8311 syamantakomer 2021-06-09T14:11:04Z Re: I've connected with 802.11ax, but I'm not getting enough speed. https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-ve-connected-with-802-11ax-but-I-m-not-getting-enough-speed/m-p/29791#M8312 <P style="margin: 0;">Thanks for the reply.</P> <P style="margin: 0;">After writing the article, we are checking various settings.<BR />Let's check what you said together.</P> <P style="margin: 0;">No progress has been made yet,</P> <P style="margin: 0;"></P> <P style="margin: 0;">If it is configured with Wi-Fi6, how much wireless speed is measured in a 2x2:2 terminal?</P> Thu, 10 Jun 2021 05:46:30 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-ve-connected-with-802-11ax-but-I-m-not-getting-enough-speed/m-p/29791#M8312 JongHaKim_Sangs 2021-06-10T05:46:30Z Re: I've connected with 802.11ax, but I'm not getting enough speed. https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-ve-connected-with-802-11ax-but-I-m-not-getting-enough-speed/m-p/29792#M8313 <P style="margin: 0;">That depends upon client compatibility and supportability.</P> <P style="margin: 0;"></P> <P style="margin: 0;">An 8*8 client will obviously provide higher data rates compare to 4*4 and lower spatial stream clients.</P> <P style="margin: 0;"></P> <P style="margin: 0;">What AP can support max, please refer the R730 <STRONG><A href="https://webresources.ruckuswireless.com/datasheets/r730/ds-ruckus-r730.pdf" target="_blank" rel="noopener noopener noreferrer">data sheet</A></STRONG>.</P> <P style="margin: 0;"></P> <P style="margin: 0;"></P> <P style="margin: 0;"></P> Thu, 10 Jun 2021 15:58:26 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-ve-connected-with-802-11ax-but-I-m-not-getting-enough-speed/m-p/29792#M8313 syamantakomer 2021-06-10T15:58:26Z