topic Re: AP ZF7982 disconnected in Access Points - Indoor and Outdoor

AP ZF7982 disconnected

jayne_chin — Sat, 25 Jul 2015 05:55:41 GMT

I have a ZD1200 with 16 APs connected. It has been working for awhile and suddenly half of it got disconnected. Can you advise some troubleshooting steps. ZF7982 & ZF7372. Controller has been restart and poe switches has been tested. No issue on switch. But AP remains disconnected. Need urgent advise

Re: AP ZF7982 disconnected

rahul_sharma_73 — Mon, 27 Jul 2015 05:28:04 GMT

how many AP's licensed at your controller.

Re: AP ZF7982 disconnected

monnat_systems — Mon, 27 Jul 2015 11:40:47 GMT

I think i will check the following:

DIR LED status on the AP?
How is then network different from where other AP is/are working?
what does the controller states in event and activities for the disconnected AP's?
Are you able to ping the disconnect AP?

Re: AP ZF7982 disconnected

jayne_chin — Tue, 28 Jul 2015 01:40:48 GMT

Hi Rahul, there is 16 AP license at the controller

Hi Monnat, to answer your question
- the LED status is on
- the are on the same VLAN1 whether is it working/not
- it just states that the user fails to join the WLAN
- yes we can still ping

We manage to get all the AP up yesterday by upgrading the firmware.

But this morning, all the AP are disconnected again. We are troubleshooting to see what went wrong again. Please advise us on the possibility.