topic Re: multiple R310 APs for 1 network in Access Points - Indoor and Outdoor

multiple R310 APs for 1 network

frank_mulder_8s — Fri, 03 Feb 2017 11:36:27 GMT

Hi, I would like to know if it is possible to use 4 R310 APs (in different rooms) to create 1 SSID for office employees to access the entire network and 1 SSID for guests for Internet access only. Do I need an additional ZoneDirector for this? Where can I find installation manuals for the R310? Thanks! Frank

Re: multiple R310 APs for 1 network

beat_schilliger — Fri, 03 Feb 2017 11:44:03 GMT

Hi Frank, I operate two R310 in an unleashed network at home. I've got two SSIDs: One in the intranet, one in the DMZ with one-time-passwords (valid for one day) for guests or/and unsafe devices (Smart-TV, Smartmeters etc.). It works as describe - no problems!
https://www.ruckuswireless.com/products/system-management-control/unleashed

Re: multiple R310 APs for 1 network

frank_mulder_8s — Fri, 03 Feb 2017 13:55:10 GMT

Thanks! Sounds like this should work. You also have 1 SSD for your intranet? Should you install the first AP as master and the others as backup?

Re: multiple R310 APs for 1 network

beat_schilliger — Fri, 03 Feb 2017 13:59:50 GMT

SSID 1: Intranet in VLAN x
SSID 2: DMZ in VLAN y

AP 1: Master
AP 2: no special configuration

Re: multiple R310 APs for 1 network

frank_mulder_8s — Fri, 03 Feb 2017 14:03:30 GMT

Thanks a lot. Sounds like this is possible without problems.

Re: multiple R310 APs for 1 network

beat_schilliger — Fri, 03 Feb 2017 14:06:19 GMT

Yes, I think so. I'm very satisfied with this solution.

Re: multiple R310 APs for 1 network

michael_brado — Fri, 03 Feb 2017 17:55:28 GMT

Thanks Community!
Here's the Release Notes and Firmware links for R310 Frank,
if you need to change the code they're running now.
https://support.ruckuswireless.com/documents/1295-ruckus-unleashed-200-3-ga-release-notes
https://support.ruckuswireless.com/software/1136-ruckus-unleashed-ap-200-3-9-13-228-ga-software-for-...

Admin Guide for Unleashed 200.3 is Online:
http://docs.ruckuswireless.com/unleashed/200.3/index.html

Re: multiple R310 APs for 1 network

tjeee_tje — Wed, 08 Feb 2017 20:42:40 GMT

How do you configurate the VLan

Re: multiple R310 APs for 1 network

beat_schilliger — Thu, 09 Feb 2017 06:02:51 GMT

You can do this by editing the WiFi network in the Unleashed Dashboard:

Re: multiple R310 APs for 1 network

tjeee_tje — Thu, 09 Feb 2017 17:05:23 GMT

Thanks, i did that, but the client does not connect.

Re: multiple R310 APs for 1 network

sachin_shringar — Thu, 04 Jan 2018 13:10:19 GMT

Hi,

Can anyone help to how to get enable the Access VLAN setting, need to configure two SSID (Staff and Guest with social media) on different VLANs.

I tried doing as mention above but i m getting Vlan Access as grey and not able change VLAN 1 to my required vlan.

below is the screenshot of the master console.

please help me to resolve this issue.