topic Re: How do I mesh three 7942 devices without Zone Director? and is this possible? in Access Points - Indoor and Outdoor

How do I mesh three 7942 devices without Zone Director? and is this possible?

wesley_ryan — Fri, 04 Oct 2013 22:43:56 GMT

How do I mesh three 7942 devices without Zone Director? and is this possible? Different channels needed?

Re: How do I mesh three 7942 devices without Zone Director? and is this possible?

santosh_bittu — Fri, 04 Oct 2013 22:50:30 GMT

Hello Wesley,

The Mesh functionality is not available when there is no ZD present on the network. You can although have clients seamlessly roam in-between AP's by having their coverage areas overlap by 30% , you will also have to configure all three AP's with the same SSID's and encryption/PSK to have the clients connect with no issues.

Hope this helps

Re: How do I mesh three 7942 devices without Zone Director? and is this possible?

keith_redfield — Fri, 04 Oct 2013 22:51:12 GMT

Sorry, a ZD is required.