topic Re: Maximum rate limting in Access Points - Indoor and Outdoor

Maximum rate limting

michael_grant_6 — Sat, 20 Dec 2014 01:56:05 GMT

Zone Director 9.7.0.0 build 220

I am trying to limit my guest WLAN access to above 20mbps threshold, but the options max out at 20mbps. Is this normal?

Re: Maximum rate limting

primoz_marinsek — Sat, 20 Dec 2014 15:36:47 GMT

What, 20Mbps is not enough for you?

Re: Maximum rate limting

michael_grant_6 — Sat, 20 Dec 2014 15:58:31 GMT

Thanks for the constructive advice. That wasn't my question.

This is a 50/5 line and I would like to limit clients to 30mbps.

I take it based on your question that this is normal.

Re: Maximum rate limting

primoz_marinsek — Sat, 20 Dec 2014 16:07:18 GMT

The rate limit is per station not per ssid, so you should limit stations lower.

Re: Maximum rate limting

primoz_marinsek — Sat, 20 Dec 2014 19:16:28 GMT

is it ok now?

Re: Maximum rate limting

munish_munish — Mon, 22 Dec 2014 19:22:46 GMT

Hi MLG,

Rate limiting in WLAN is to limit the download and upload speed of the clients connecting to this WLAN.

When enabled,the network traffic throughput of each network device (i.e., client) is limited to the specified rate .

Valid values
include 0.10 and between 0.25~20.00 in 0.25 increments. It is normal

Thanks
Munish