https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Is-there-any-way-to-configure-dynamic-client-isolation-from-a/m-p/5008#M737 I am transitioning from WPA2 Personal to WPA2 Enterprise. I love Dynamic VLANs, but there are some devices that I want to isolate from one another entirely and configuring a different VLAN at my router and switch for each to do isolation is a pain. I am thinking of making a second SSID for such devices so that I can enable client isolation on it, but that will likely require that I setup another RADIUS server. Even if it didn't require a different RADIUS server, it poses a pain should I ever want to move a device from a VLAN that uses client isolation to a VLAN that does not.<BR /><BR />It occurs to me that this would be easier if there were some way to toggle client isolation on a per client basis at the RADIUS server that my Ruckus Zoneflex R710 running the standalone firmware understood. Is there a way to do that? Thu, 02 Nov 2017 23:53:07 GMT shiningarcanine 2017-11-02T23:53:07Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Is-there-any-way-to-configure-dynamic-client-isolation-from-a/m-p/5008#M737 I am transitioning from WPA2 Personal to WPA2 Enterprise. I love Dynamic VLANs, but there are some devices that I want to isolate from one another entirely and configuring a different VLAN at my router and switch for each to do isolation is a pain. I am thinking of making a second SSID for such devices so that I can enable client isolation on it, but that will likely require that I setup another RADIUS server. Even if it didn't require a different RADIUS server, it poses a pain should I ever want to move a device from a VLAN that uses client isolation to a VLAN that does not.<BR /><BR />It occurs to me that this would be easier if there were some way to toggle client isolation on a per client basis at the RADIUS server that my Ruckus Zoneflex R710 running the standalone firmware understood. Is there a way to do that? Thu, 02 Nov 2017 23:53:07 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Is-there-any-way-to-configure-dynamic-client-isolation-from-a/m-p/5008#M737 shiningarcanine 2017-11-02T23:53:07Z