https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Using-a-T710-with-P300-connected-to-PoE-out-for-back-haul/m-p/26759#M7275 You can use this scenario.&nbsp; I use to have a same cae.<BR alt="" name="" rel="" target="" title="" type="" value="" /> Tue, 31 Jul 2018 03:58:11 GMT nnamjin_roh 2018-07-31T03:58:11Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Using-a-T710-with-P300-connected-to-PoE-out-for-back-haul/m-p/26758#M7274 I need to provide Wifi To areas with no wired network infrastructure, mounting locations will be on the light pole. I was wondering if the ports on the T710 acts like a switch/hub where i use one&nbsp;902-0180-XX00 injector to power the T710, then connect the P300 to the PoE out port on the T710, and they communicate that way to back haul the traffic to a central tower with another P300 wired into a switch<U alt="" name="" rel="" target="" title="" type="" value="">.</U> Fri, 27 Jul 2018 20:55:55 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Using-a-T710-with-P300-connected-to-PoE-out-for-back-haul/m-p/26758#M7274 michael_hypolit 2018-07-27T20:55:55Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Using-a-T710-with-P300-connected-to-PoE-out-for-back-haul/m-p/26759#M7275 You can use this scenario.&nbsp; I use to have a same cae.<BR alt="" name="" rel="" target="" title="" type="" value="" /> Tue, 31 Jul 2018 03:58:11 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Using-a-T710-with-P300-connected-to-PoE-out-for-back-haul/m-p/26759#M7275 nnamjin_roh 2018-07-31T03:58:11Z