https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-Application-recognition-and-control-feature-work-without-ZD/m-p/26414#M7187 controller only feature at the moment Mon, 05 Oct 2015 08:27:36 GMT monnat_systems 2015-10-05T08:27:36Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-Application-recognition-and-control-feature-work-without-ZD/m-p/26413#M7186 Can an R700 perform Application recognition if the controller is temporarily not available in the network? Is this feature fully supported on R700 or it does requires controller to be in place? Sun, 04 Oct 2015 09:17:55 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-Application-recognition-and-control-feature-work-without-ZD/m-p/26413#M7186 ovais_qayyum 2015-10-04T09:17:55Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-Application-recognition-and-control-feature-work-without-ZD/m-p/26414#M7187 controller only feature at the moment Mon, 05 Oct 2015 08:27:36 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Can-Application-recognition-and-control-feature-work-without-ZD/m-p/26414#M7187 monnat_systems 2015-10-05T08:27:36Z