https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Error-102-AP-configuration-update-failed-with-T750SE-on-vSZ/m-p/26234#M7153 <P style="margin: 0;">Hi Andy,</P> <P style="margin: 0;"></P> <P style="margin: 0;">Try to factory reset this AP, delete its entry from controller and rejoin.</P> <P style="margin: 0;"></P> <P style="margin: 0;">If still failing, try to fetch output of below command from AP CLI.</P> <P style="margin: 0;"></P> <P style="margin: 0;">get syslog log</P> <P style="margin: 0;"></P> <P style="margin: 0;">Check in log if you can find the reason for failure. If you are not sure what to look for, open up a support case for help.</P> Mon, 19 Apr 2021 19:14:05 GMT syamantakomer 2021-04-19T19:14:05Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Error-102-AP-configuration-update-failed-with-T750SE-on-vSZ/m-p/26233#M7152 <P style="margin: 0;">Hi!</P> <P style="margin: 0;">I've installed two T750SE AP's, one AP is configured correctly but the other one gets a102 error "configuration update failed" when moving this AP into a AP group and/or changing it's AP name.</P> <P style="margin: 0;">The correct configured one is configured in the same AP group and they're both running the same firmware version 5.2.2.0.301 (also checked through SSH on the specific AP).</P> <P style="margin: 0;">The faulty AP is and stays online in it's default state so it seems....</P> <P style="margin: 0;">Somebody have any suggestions???</P> Fri, 09 Apr 2021 11:31:47 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Error-102-AP-configuration-update-failed-with-T750SE-on-vSZ/m-p/26233#M7152 andy_amattaram 2021-04-09T11:31:47Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Error-102-AP-configuration-update-failed-with-T750SE-on-vSZ/m-p/26234#M7153 <P style="margin: 0;">Hi Andy,</P> <P style="margin: 0;"></P> <P style="margin: 0;">Try to factory reset this AP, delete its entry from controller and rejoin.</P> <P style="margin: 0;"></P> <P style="margin: 0;">If still failing, try to fetch output of below command from AP CLI.</P> <P style="margin: 0;"></P> <P style="margin: 0;">get syslog log</P> <P style="margin: 0;"></P> <P style="margin: 0;">Check in log if you can find the reason for failure. If you are not sure what to look for, open up a support case for help.</P> Mon, 19 Apr 2021 19:14:05 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Error-102-AP-configuration-update-failed-with-T750SE-on-vSZ/m-p/26234#M7153 syamantakomer 2021-04-19T19:14:05Z