topic Re: 7762 outdoor APs - 5.15 - 5.25 GHz band (channels 36 to 48) output power in Access Points - Indoor and Outdoor

7762 outdoor APs - 5.15 - 5.25 GHz band (channels 36 to 48) output power

thbert — Wed, 04 Apr 2018 17:58:57 GMT

We have ZoneFlex 7762 APs purchased before 2014. We would like to take advantage of the 2014 FCC rule change that allows outdoor usage of the 5.15 - 5.25 GHz band (channels 36 to 48) at 1 W output power. Our version of ZoneDirector allows it but are the 7762's FCC compliant "as is" or do we need to adjust Tx power? See https://www.federalregister.gov/documents/2014/05/01/2014-09279/unlicensed-national-information-infr...

Re: 7762 outdoor APs - 5.15 - 5.25 GHz band (channels 36 to 48) output power

sunny_gupta — Thu, 12 Apr 2018 06:16:08 GMT

1W output, aka 1000 mW, aka 30dBm is a pretty high Tx power output. I do not believe the 7762 can transmit at that level even with country codes applied. I cannot find specific documentation since its a bit older, however most of the current APs are in the 20-28dbBm Tx Power range.

Re: 7762 outdoor APs - 5.15 - 5.25 GHz band (channels 36 to 48) output power

michael_brado — Thu, 12 Apr 2018 21:15:21 GMT

The 7762 antenna adds 3db gain, as does BeamFlex add another 3db gain, up to you to stay within country limitations, and you can find the datasheet here: http://c541678.r78.cf2.rackcdn.com/datasheets/ds-zoneflex-7762-series.pdf

Re: 7762 outdoor APs - 5.15 - 5.25 GHz band (channels 36 to 48) output power

thbert — Thu, 12 Apr 2018 21:36:12 GMT

Thanks, I wasn't sure how much the BeamFlex was adding.