https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/LAG-Configuration-for-P300-bridges/m-p/23662#M6474 <P style="margin: 0;">Looking to set up a configuration with two P300 root bridges connected to an icx7150 and two P300 non root bridges connected to an icx 7250 and utilizing link aggregation to provide more bandwidth. I found this reference on the ruckus site <A href="https://unleashedsupport.ruckuswireless.com/answers/000006437" target="test_blank">https://unleashedsupport.ruckuswireless.com/answers/000006437</A><BR />but at this point with all configuration in place, ports are in an up/LACP-Blocked<BR />From what I have read this can be due to a protocol mismatch, but have not have found any configuration inconsistencies. The ports are tagged for multiple VLANS.&nbsp; Any suggestions on why this isn't working as expected?</P> Wed, 24 Feb 2021 21:16:05 GMT j_denhart 2021-02-24T21:16:05Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/LAG-Configuration-for-P300-bridges/m-p/23662#M6474 <P style="margin: 0;">Looking to set up a configuration with two P300 root bridges connected to an icx7150 and two P300 non root bridges connected to an icx 7250 and utilizing link aggregation to provide more bandwidth. I found this reference on the ruckus site <A href="https://unleashedsupport.ruckuswireless.com/answers/000006437" target="test_blank">https://unleashedsupport.ruckuswireless.com/answers/000006437</A><BR />but at this point with all configuration in place, ports are in an up/LACP-Blocked<BR />From what I have read this can be due to a protocol mismatch, but have not have found any configuration inconsistencies. The ports are tagged for multiple VLANS.&nbsp; Any suggestions on why this isn't working as expected?</P> Wed, 24 Feb 2021 21:16:05 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/LAG-Configuration-for-P300-bridges/m-p/23662#M6474 j_denhart 2021-02-24T21:16:05Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/LAG-Configuration-for-P300-bridges/m-p/23663#M6475 <P style="margin: 0;">Does link work if you disconnect one bridge from the switch?</P> Thu, 25 Feb 2021 07:39:58 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/LAG-Configuration-for-P300-bridges/m-p/23663#M6475 eizens_putnins 2021-02-25T07:39:58Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/LAG-Configuration-for-P300-bridges/m-p/23664#M6476 <P style="margin: 0;">Yes I would start with one pair first and then extend.</P> <P style="margin: 0;"></P> <P style="margin: 0;">regards</P> <P style="margin: 0;">Martin</P> Thu, 25 Feb 2021 10:01:16 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/LAG-Configuration-for-P300-bridges/m-p/23664#M6476 martin_martin 2021-02-25T10:01:16Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/LAG-Configuration-for-P300-bridges/m-p/23665#M6477 <P style="margin: 0;">Probably some of mentioned features isn't properly disabled. Anyway, you can create static LAG too, which should work in any case.</P> Thu, 25 Feb 2021 14:21:37 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/LAG-Configuration-for-P300-bridges/m-p/23665#M6477 eizens_putnins 2021-02-25T14:21:37Z