topic Re: R510 - Building the Unleashed Network. It may take a few minutes. in Access Points - Indoor and Outdoor

R510 - Building the Unleashed Network. It may take a few minutes.

gary_avalos — Wed, 31 Jul 2019 13:17:58 GMT

I have the following problem with the R510. I put firmware R510_200.7.10.102.64.bl7 and at the time of entering the Master this error comes out:

Building the Unleashed Network. It may take a few minutes.

I entered by ssh and I did a get director and I see that he doesn't connect to the Master

----- Unleashed Info ------
Device role: ap
Primary Controller: n / a
Secondary Controller: n / a
DHCP Opt43 Code: 3

The information of the most recent Unleashed:
   [1] 192.168.1.161

   AP is under management of Unleashed: 192.168.1.161 / 8x: 1x: 9x: xf: xx: c0,
   Currently AP is in state: SULKING

Re: R510 - Building the Unleashed Network. It may take a few minutes.

michael_brado — Wed, 31 Jul 2019 22:01:52 GMT

Are you connected to the ConfigureMe.XXYYZZ ssid like required?

Re: R510 - Building the Unleashed Network. It may take a few minutes.

gary_avalos — Wed, 31 Jul 2019 23:35:50 GMT

Yes, I tell you that if I leave it without connecting to the Master it works without problem. But when you join the master you get this error: Building the Unleashed Network. It may take a few minutes.