topic A way to use 6 MHz channels on Ruckus APs in Access Points - Indoor and Outdoor

A way to use 6 MHz channels on Ruckus APs

abdou_mfopa — Wed, 11 Oct 2017 10:16:33 GMT

I would like to use 6MHz wide channels on ZoneDirector, SmartZone 100 and SmartZone 300 and out-door APs on 5GHz and 2.4GHz (R700 and R300).

I know I can use some 20 or 40MHz channels on bridges, but available channels are limited and I would need as much of the 5GHz and of 2.4GHz spectrum as possible. The regulator in my Country allow to use 6MHz wide channel to deploy network operator. Please can you give me the way to do it on APs and bridges?

Re: A way to use 6 MHz channels on Ruckus APs

ismael_kouma — Wed, 11 Oct 2017 12:24:59 GMT

not sure it's possible

Re: A way to use 6 MHz channels on Ruckus APs

phillipsca — Wed, 11 Oct 2017 13:48:24 GMT

I didn't think these APs broadcast in the white space range. I'd be contacting your Ruckus distribution supplier for clarity on this one.