https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Standalone-AP-Hotspot-Radius-Authentication/m-p/2765#M61 I am trying to get a standalone AP working with radius auth that allows the user beyond a captive portal. I have the AP communicating with Radius just fine and I can redirect the user to the portal. The issue is the AP quieries the Radius server once and then stops. So for a new user connecting to the captive portal I need the AP to query the Radius server after the user has completed what it needs to complete on the captive portal. Essentially I need to give the AP a nudge to re-auth against Radius. <BR /><BR /> Anyone got this working? Wed, 18 Dec 2013 23:54:36 GMT jason_pearcy 2013-12-18T23:54:36Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Standalone-AP-Hotspot-Radius-Authentication/m-p/2765#M61 I am trying to get a standalone AP working with radius auth that allows the user beyond a captive portal. I have the AP communicating with Radius just fine and I can redirect the user to the portal. The issue is the AP quieries the Radius server once and then stops. So for a new user connecting to the captive portal I need the AP to query the Radius server after the user has completed what it needs to complete on the captive portal. Essentially I need to give the AP a nudge to re-auth against Radius. <BR /><BR /> Anyone got this working? Wed, 18 Dec 2013 23:54:36 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Standalone-AP-Hotspot-Radius-Authentication/m-p/2765#M61 jason_pearcy 2013-12-18T23:54:36Z