topic Re: Unleashed: Cannot change 'Model Specific Control' AP Group Setting in Access Points - Indoor and Outdoor

Unleashed: Cannot change 'Model Specific Control' AP Group Setting

benjamin_whiteh — Fri, 19 Jul 2019 10:01:50 GMT

Our AP Group 'Model Specific Control' dropdown list shows R310 even though all our APs are R610 running the same, latest firmware. Changing this dropdown to R610 and clicking 'Finish' does not affect a change... I look back and it still shows R310. This is in either Chrome or Safari latest browsers, on Mojave.

Re: Unleashed: Cannot change 'Model Specific Control' AP Group Setting

thomas_fankhaus — Fri, 19 Jul 2019 10:48:11 GMT

probably you misunterstand. you choose your model, change the setting and save.
when you look back it is again on the first.

Re: Unleashed: Cannot change 'Model Specific Control' AP Group Setting

benjamin_whiteh — Fri, 19 Jul 2019 11:52:01 GMT

Hi Thomas, unfortunately not. The dropdown list has a tick against R310. Also, R310 is not the first or last in the list.

Re: Unleashed: Cannot change 'Model Specific Control' AP Group Setting

veno77 — Sat, 20 Jul 2019 07:27:12 GMT

Benjamin, it is ok. Read the post of Thomas again and you will understand it. This is just a dropdown with list of all Unleashed Ruckus APs you can set different settings for different models and save. That's all, what is shown doesn't matter when you open the tab... I agree it is not very intuitive though...

Re: Unleashed: Cannot change 'Model Specific Control' AP Group Setting

benjamin_whiteh — Mon, 22 Jul 2019 08:37:03 GMT

Ok, so when I hit save and go back and see a tick against the WRONG model, I'm supposed to 'know' that my setting were saved and the list is wrong?

Wonderful!

Re: Unleashed: Cannot change 'Model Specific Control' AP Group Setting

benjamin_whiteh — Mon, 22 Jul 2019 08:37:26 GMT

Thanks for the heads-up tho 🙂