topic Re: 7762 configuration for range and coverage in Access Points - Indoor and Outdoor

7762 configuration for range and coverage

moustapha1_ahma — Mon, 01 Sep 2014 11:48:37 GMT

I’m facing a small issue with my outdoor kit. I have successfully managed to setup the AP 7762 with a ZD1106.

However configured to operate at full power, mounted on a balcony, I’m not able to get a signal as I walk beyond 25-30m.

Could you advice the right setting to use to configure for range/coverage? What data rate can theoretically be achieved at various ranges?

Re: 7762 configuration for range and coverage

sheri_davis_e02 — Mon, 21 Sep 2020 17:30:53 GMT

Hey I am for the first time here. I came crosswise this blog and I find It truly useful & it helped me out ample. I hope to give somewhat back and aid others like you helped me. Ships are answerable for moving about 80% of the world trade. The shipping sector closely follows the world GDP. Every about 5 years a cycle of boom and bust starts and end. For certain years trade is increasing and cargo prices soar so additional ships are erected at a higher cost. When request is seeing by the new ships an oversupply condition occurs, prices bead and building prices reach very low levels. That is a time when convinced ship-owners will order new ships in hope of the new boom. best essay writing service

Re: 7762 configuration for range and coverage

andrew_giancol1 — Mon, 21 Sep 2020 17:36:45 GMT

@Michael Brado - Spam comment from Sheri Davis.

Re: 7762 configuration for range and coverage

grodog-prod — Mon, 21 Sep 2020 19:22:27 GMT

Removed!
Allan.