topic Re: Default SNMP community in T310C and T310D? in Access Points - Indoor and Outdoor

Default SNMP community in T310C and T310D?

jeff_tuttle — Sat, 19 Dec 2020 08:56:21 GMT

Not in user guide. How does one set a community or see the default SNMP community in T310C and T310D in standalone mode? FW is 114.0.0.0.1360 Many thanks, Jeff

Re: Default SNMP community in T310C and T310D?

mitchell_axtell — Tue, 22 Dec 2020 09:06:16 GMT

The commands are CLI only:

set remote-mgmt snmp

set snmp version v2c

set snmp system contact <>

set snmp system location <NO SPACES>

set snmp community ro public

set snmp community rw private

get snmp to view

Re: Default SNMP community in T310C and T310D?

jeff_tuttle — Thu, 24 Dec 2020 07:15:47 GMT

Thank you.

May I ask where did you found those commands?

Many thanks.

Re: Default SNMP community in T310C and T310D?

mitchell_axtell — Mon, 28 Dec 2020 03:16:06 GMT

I think it's "help snmp" to show the options in the CLI, but I don't have one handy to check so that may be incorrect. It should be under systemgroup so if that command doesn't work it would be "help systemgroup". Basically "help <command>" will show you the options like ? on most switches.