https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Radio-stops-transmitting/m-p/19713#M5173 If you're not already running the latest ZoneFlex release for the ZD1000 I'd recommend upgrading. <A href="https://support.ruckuswireless.com/products/8-zonedirector-1000/software/374-zd1000-9-3-4-0-21-mr-software-release" rel="nofollow">https://support.ruckuswireless.com/pr...</A> <BR /><BR /> If you are and you have an active support contract, then it's probably best to open a support case. Wed, 27 Nov 2013 15:08:20 GMT keith_redfield 2013-11-27T15:08:20Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Radio-stops-transmitting/m-p/19712#M5172 I have an Zonedirector 1000 along with some 7942 APs. <BR /> We have noticed some issues where the radio in the AP simply dies. <BR /><BR /> It stops transmitting (it is online in the zonedirector) but it does not show up on the insidder scan. <BR /> Power cycle the AP and it start transmitting Again. <BR /><BR /> This behaviour makes it very difficult to troubleshoot since the ZD states its online. Wed, 27 Nov 2013 07:21:43 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Radio-stops-transmitting/m-p/19712#M5172 dennis_boutrup 2013-11-27T07:21:43Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Radio-stops-transmitting/m-p/19713#M5173 If you're not already running the latest ZoneFlex release for the ZD1000 I'd recommend upgrading. <A href="https://support.ruckuswireless.com/products/8-zonedirector-1000/software/374-zd1000-9-3-4-0-21-mr-software-release" rel="nofollow">https://support.ruckuswireless.com/pr...</A> <BR /><BR /> If you are and you have an active support contract, then it's probably best to open a support case. Wed, 27 Nov 2013 15:08:20 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Radio-stops-transmitting/m-p/19713#M5173 keith_redfield 2013-11-27T15:08:20Z