https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Status-of-5-GHz-channel-assignment-in-9-9-216-and-9-10-218/m-p/4237#M516 I just upgraded to 9.9.216 and am planning to go to 9.10.218 for hopeful fixes on R700 for 5 GHz. On 9.9 my ZF7363 are all coming up as channel 52 on 5 GHz and aren't moving. Does background scanning or channelfly work for 5 GHz in either of these releases? Just trying to verify status. Wed, 08 Apr 2015 15:48:12 GMT brian_hoyt_6612 2015-04-08T15:48:12Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Status-of-5-GHz-channel-assignment-in-9-9-216-and-9-10-218/m-p/4237#M516 I just upgraded to 9.9.216 and am planning to go to 9.10.218 for hopeful fixes on R700 for 5 GHz. On 9.9 my ZF7363 are all coming up as channel 52 on 5 GHz and aren't moving. Does background scanning or channelfly work for 5 GHz in either of these releases? Just trying to verify status. Wed, 08 Apr 2015 15:48:12 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Status-of-5-GHz-channel-assignment-in-9-9-216-and-9-10-218/m-p/4237#M516 brian_hoyt_6612 2015-04-08T15:48:12Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Status-of-5-GHz-channel-assignment-in-9-9-216-and-9-10-218/m-p/4238#M517 Yes, version 9.9 code has background scanning in 2.4 and 5G, for your R700 and all other model APs, if you have enabled it.<BR /><BR />Could it be that your APs are deployed by themselves, or so far apart from other APs that they don't recognize any neighbors? Wed, 08 Apr 2015 21:51:35 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Status-of-5-GHz-channel-assignment-in-9-9-216-and-9-10-218/m-p/4238#M517 michael_brado 2015-04-08T21:51:35Z