topic Re: All SSID's are broadcast but I just want the local SSID's visable at the current location in Access Points - Indoor and Outdoor

All SSID's are broadcast but I just want the local SSID's visable at the current location

chuck_aaker — Tue, 10 Mar 2015 13:51:03 GMT

All SSID's are broadcast but I just want the local SSID's visable at the current location. We have 5 locations, each location will have a user and guest SSID, we want only the local SSID to be visible at each location. Maybe I am just missing something to make this work.

Re: All SSID's are broadcast but I just want the local SSID's visable at the current location

keith_gipe — Tue, 10 Mar 2015 14:00:19 GMT

You can create WLAN groups for each location that only have the SSIDs you want broadcast selected, then create AP groups that have the AP's for those locations in them and override the default WLAN group there.

Re: All SSID's are broadcast but I just want the local SSID's visable at the current location

chuck_aaker — Tue, 10 Mar 2015 16:49:09 GMT

Thank you, I did the over ride on the groups, and now they appear correctly at all locations. I am waiting for the APs to be connect at one location. With that, I did find out that if you don't have the APs connected at a site when you do the override it does not retain the setting, even though it does not show up in other location. I will see if the setting is retained after we connect the APs. Interesting?