topic R710 5Ghz Radio keeps dropping in Access Points - Indoor and Outdoor

R710 5Ghz Radio keeps dropping

stephen_lee_j83 — Sun, 30 Apr 2017 16:11:26 GMT

Hi I've got a R710 operating in standalone mode. 2.4Ghz Radio is solid but 5Ghz Radio keeps dropping, the SSIDs are not broadcast & when I check the Web Interface all the 5 Ghz have no Bssids but wireless status is up & broadcast SSID is Enabled. After a few minutes the SSIDs are broadcast & the BSSIDs are listed in Web Interface.?

Re: R710 5Ghz Radio keeps dropping

michael_brado — Mon, 01 May 2017 17:20:14 GMT

Are you running the latest firmware for R710 standalone?

Re: R710 5Ghz Radio keeps dropping

stephen_lee_j83 — Sun, 07 May 2017 15:17:19 GMT

Hi Michael,
I'm running 104.0.0.0.1374.
I am connected to a MBP via a Ubiquiti EdgeRouterX.
Thanks
Stephen

Re: R710 5Ghz Radio keeps dropping

michael_brado — Tue, 09 May 2017 21:10:53 GMT

Hi Stephen,

Sorry, I dont' know what MBP stands for, but I looked up specs on "Ubiquiti EdgeRouterX"
that says they make passive and PoE models. On a far chance, if you happen to power your
AP from this device, and all the other ports too, could our AP be losing power from the ER-X
such that it's 5G radio blinks? Not sure, just an idea. Your AP support info logs might offer
some other insight into what's happened.