topic Re: How to integrate with Active directory or Radius with ZoneFlex R300 Access Point in Access Points - Indoor and Outdoor

How to integrate with Active directory or Radius with ZoneFlex R300 Access Point

tharindu_ranasi — Mon, 09 Mar 2015 06:33:00 GMT

I Have ZoneFlex R300 Access Point. I want to integrate with active directory. How to do this stuff? It should be configure with radius server or without radius server. Pls anyone support me ASAP.

Re: How to integrate with Active directory or Radius with ZoneFlex R300 Access Point

oliver_grachegg — Mon, 09 Mar 2015 11:39:43 GMT

If you plan to use it to authenticate on an 802.1x SSID using AD credentials you will need a radius server.

Re: How to integrate with Active directory or Radius with ZoneFlex R300 Access Point

tharindu_ranasi — Tue, 17 Mar 2015 03:10:12 GMT

Thanks.. have any other methods to do this..

Re: How to integrate with Active directory or Radius with ZoneFlex R300 Access Point

munish_munish — Tue, 17 Mar 2015 16:34:30 GMT

Hi LionTR,

If you want to authenticate users against an external Authentication server, you will need to first configure your AAA server, then point *ZoneDirector* to the AAA server so that requests will be passed through * ZoneDirector* before access is granted.

ZoneDirector supports Active Directory AAA server.

However if you are using AP in stand alone mode, you can configure a 802.1x WLAN mapped to a radius server .

Thanks
Munish

Re: How to integrate with Active directory or Radius with ZoneFlex R300 Access Point

tharindu_ranasi — Wed, 18 Mar 2015 06:59:39 GMT

Got It thanks 🙂

Re: How to integrate with Active directory or Radius with ZoneFlex R300 Access Point

eizens_putnins — Fri, 03 Apr 2015 13:07:13 GMT

You have to configure NPS (service on MS server, providing Radius functionality for user data in AD), and you can do it easy than, as with any standard server. There is detailed manual from Ruckus how to configure both ends, available on Ruckus partner site.

Re: How to integrate with Active directory or Radius with ZoneFlex R300 Access Point

eizens_putnins — Fri, 03 Apr 2015 13:10:24 GMT

NPS server works for both stand-alone and connected to ZD AP, as it works exactly as a standard Radius server.
With ZD you can also make direct authentication from MS AD, which doesn't require any configuration on MS Server. Unfortunately, this mode applies only to WEB-authentication, which is not of much use -- except for guest network. But who will authenticate guests through MS AD?