https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/M510-How-to-access-the-real-time-GPS-location-after-it-was/m-p/18631#M4938 Thank for the reply. So, I can't get the data If I use this AP as standalone (without connecting to SZ/ vSZ)<BR alt="" name="" rel="" target="" title="" type="" value="" /> Fri, 25 Jan 2019 04:43:02 GMT rajiv_kumar 2019-01-25T04:43:02Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/M510-How-to-access-the-real-time-GPS-location-after-it-was/m-p/18628#M4935 Suppose If I implement few of the M510 in the school buses now how would I get the real time GPS location of the buses. From where I am able top get the real time location (GPS). Thu, 24 Jan 2019 11:30:03 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/M510-How-to-access-the-real-time-GPS-location-after-it-was/m-p/18628#M4935 rajiv_kumar 2019-01-24T11:30:03Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/M510-How-to-access-the-real-time-GPS-location-after-it-was/m-p/18629#M4936 This data is transmitted to the Smartzone Controller where you can view the location of M510s. Thu, 24 Jan 2019 13:16:38 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/M510-How-to-access-the-real-time-GPS-location-after-it-was/m-p/18629#M4936 sunny_gupta 2019-01-24T13:16:38Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/M510-How-to-access-the-real-time-GPS-location-after-it-was/m-p/18630#M4937 Thank for the reply. So, I can't get the data If I use this AP as standalone (without connecting to SZ/ vSZ) Fri, 25 Jan 2019 04:35:12 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/M510-How-to-access-the-real-time-GPS-location-after-it-was/m-p/18630#M4937 rajiv_kumar 2019-01-25T04:35:12Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/M510-How-to-access-the-real-time-GPS-location-after-it-was/m-p/18631#M4938 Thank for the reply. So, I can't get the data If I use this AP as standalone (without connecting to SZ/ vSZ)<BR alt="" name="" rel="" target="" title="" type="" value="" /> Fri, 25 Jan 2019 04:43:02 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/M510-How-to-access-the-real-time-GPS-location-after-it-was/m-p/18631#M4938 rajiv_kumar 2019-01-25T04:43:02Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/M510-How-to-access-the-real-time-GPS-location-after-it-was/m-p/18632#M4939 That is my understanding.<BR />In fact, the M510 does not currently run on Standalone Code.&nbsp; It must connect to a SZ (physical or virtual) to function.<BR />Ruckus Unleashed software (controllerless or 'standalone' but up to 25 devices) support will be released for M510 shortly as well which is another option.&nbsp; Though I believe in this operation mode GPS data will not flow..&nbsp; that still requires a SZ. Fri, 25 Jan 2019 13:39:06 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/M510-How-to-access-the-real-time-GPS-location-after-it-was/m-p/18632#M4939 sunny_gupta 2019-01-25T13:39:06Z