https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/P300/m-p/18540#M4915 The user interface protocol for Ruckus P300 bridge is either HTTPS or SSH.<BR />HTTPS is for the Graphical User Interface (GUI) or SSH for the Command Line Interface (CLI).<BR />There is no human-machine interface (HMI) and I don't think you can manage our P300s thru "SCADA". Wed, 15 Jan 2020 23:07:06 GMT michael_brado 2020-01-15T23:07:06Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/P300/m-p/18539#M4914 Hello,<BR alt="" name="" rel="" target="" title="" type="" value="" />I am using P300 Ruckus Root and Non-Root bridges. I need to take the signal strength of the bridge in the Wonderware Intouch(SCADA). For that i need to know what's the datatype for the Signal Strength in the bridge. <B alt="" name="" rel="" target="" title="" type="" value="">Is there any User Interface Protocol for Ruckus P300?</B> From my old post i came to know about SNMP Integration. I could configure my SCADA and bridge through SNMP. But for accessing the data i need to know Datatype of the signal strength. Please give me an <B>User Interface Protocol for Ruckus P300 bridge</B>. Mon, 13 Jan 2020 13:55:57 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/P300/m-p/18539#M4914 vaitheeswaran_e 2020-01-13T13:55:57Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/P300/m-p/18540#M4915 The user interface protocol for Ruckus P300 bridge is either HTTPS or SSH.<BR />HTTPS is for the Graphical User Interface (GUI) or SSH for the Command Line Interface (CLI).<BR />There is no human-machine interface (HMI) and I don't think you can manage our P300s thru "SCADA". Wed, 15 Jan 2020 23:07:06 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/P300/m-p/18540#M4915 michael_brado 2020-01-15T23:07:06Z