topic Re: Recommended/Stabel software for R500 in Access Points - Indoor and Outdoor

Recommended/Stabel software for R500

harald_l_ken — Mon, 04 Jan 2016 08:52:38 GMT

Does anyone have a recommendation for what software version to use in a controller based enviroment on R500 access-points?
In our test enviroment we are running Software Version::3.2.0.0.593 for our Ruckus R500 Access Points. Any surgestions?

Re: Recommended/Stabel software for R500

monnat_systems — Mon, 04 Jan 2016 10:51:18 GMT

i think you meant recommended software version on Ruckus Vscg powered cloud controller for R500. correct?
Because Software Version::3.2.0.0.593 is of Ruckus vSCG

Re: Recommended/Stabel software for R500

harald_l_ken — Mon, 04 Jan 2016 11:02:28 GMT

I am running a vSZ - Virtual Smart Zone Controller (Image:vscg-3.2.0.0.790) and this controller will controll/power many R500 access-points, and I wonder if there is a recommended software version to put on the controller for the R500 access-points?

Re: Recommended/Stabel software for R500

eizens_putnins — Tue, 05 Jan 2016 08:19:34 GMT

Hello, for my experience all firmware versions work fine for cSZ, by far the most important is vSZ configuration (allowed channels, scanning mode, allowed rates) -- it may be crucial to get compatibility with real wi-fi client mix. We worked with all firmaware versions bundled with vSZ releases from 3.0 to 3.2, and there was no problems with firmware at all. Hope it helps...

Re: Recommended/Stabel software for R500

harald_l_ken — Tue, 05 Jan 2016 11:09:01 GMT

Thanks for your reply and advice!