topic Re: Is there a CLI reference guide for ZF7372 AP? in Access Points - Indoor and Outdoor

Is there a CLI reference guide for ZF7372 AP?

vladimir_lavruk — Thu, 05 Mar 2015 10:18:40 GMT

I can't find anything in the technical documents section. There are several CLI guides for ZoneDirector and FlexMaster. But I'm looking for a guide for an 7372AP in a standalone mode. I also tried to search "CLI", but there was no results. Could you please provide a link.

Re: Is there a CLI reference guide for ZF7372 AP?

monnat_systems — Thu, 05 Mar 2015 11:05:20 GMT

Hi

I doubt about any CLI guide for standalone AP however while in CLI mode, if you type command "help" then it will give you all commands for use.

I made a copy of all those commands in word document for easy search.

Hope it helps.

Re: Is there a CLI reference guide for ZF7372 AP?

edgar_ivan_moct — Fri, 06 Mar 2015 18:06:59 GMT

I did the same, but then I found a pdf with all the cli commands in the Documents of the support page, that turned out to be the same.

Re: Is there a CLI reference guide for ZF7372 AP?

edgar_ivan_moct — Fri, 06 Mar 2015 18:21:24 GMT

I did the same, but then I found a pdf with all the cli commands in the Documents of the support page, that turned out to be the same thing.

Re: Is there a CLI reference guide for ZF7372 AP?

vladimir_lavruk — Fri, 06 Mar 2015 19:23:30 GMT

Hi, Ed!

What was the filename or the name of the document?

Re: Is there a CLI reference guide for ZF7372 AP?

edgar_ivan_moct — Fri, 06 Mar 2015 19:24:42 GMT

9.8 CLI Guide Reference.

Re: Is there a CLI reference guide for ZF7372 AP?

vladimir_lavruk — Fri, 06 Mar 2015 19:37:49 GMT

it is ZoneDirector or FlexMaster CLI guides
but I need the ZoneFlex CLI

Re: Is there a CLI reference guide for ZF7372 AP?

michael_brado — Fri, 13 Mar 2015 20:19:17 GMT

Ruckus does not officially support AP CLI. There may be ZD managed AP commands seen in standalone mode, that cannot be configured, etc.

Re: Is there a CLI reference guide for ZF7372 AP?

michael_brado — Mon, 21 Aug 2017 16:51:24 GMT

For Toomas who Liked my comment above... We do support Solo/Standalone AP version CLI commands (more or less) versus
and AP that was SZ or ZD managed and then factory defaulted. So explore the commands available under the CLI if you run a
version like 104.0.0.0.1347 for the 7372, the AP model this question was originally asked about (two years ago, before 104.x was out)

https://support.ruckuswireless.com/software/1017-zoneflex-solo-access-point-104-0-0-0-1347-ga-softwa...
https://support.ruckuswireless.com/documents/1137-zoneflex-indoor-ap-104-0-user-guide

Re: Is there a CLI reference guide for ZF7372 AP?

aki_ogoshi — Mon, 09 Apr 2018 07:48:08 GMT

Thank you for supporting Solo/Standalone AP version CLI commands.
Why dont you make a command references?