topic Re: Lower DHCP lease time utilizing CLI for standalone AP mainly ZF 7363 in Access Points - Indoor and Outdoor

Lower DHCP lease time utilizing CLI for standalone AP mainly ZF 7363

adam_tran_76457 — Sat, 02 Jan 2016 08:11:22 GMT

I been searching for days, but could not find any answer regarding a CLI for lowering the DHCP lease time for a standalone Ruckus 7363. If anyone could provide some Commands, Thanks in advance.

Re: Lower DHCP lease time utilizing CLI for standalone AP mainly ZF 7363

chang_chang — Sat, 02 Jan 2016 15:50:53 GMT

Hi Adam,
Please check up below command, it's been verified with 100.X version.

Usage: set dhcps {options}
         -> {enable|disable}
         -> iprange
         -> leasetime <90..86400> (in seconds)
         -> example: set dhcps leasetime 90 (please reboot AP to make this take effect!)

You could reduce leasetime 90sec but I do not recommend too much low lease time interval.

Thanks
Chang

Re: Lower DHCP lease time utilizing CLI for standalone AP mainly ZF 7363

adam_tran_76457 — Sat, 02 Jan 2016 16:16:36 GMT

thank you so much.