topic Validity Period in Access Points - Indoor and Outdoor

Validity Period

fakhri_mansor — Wed, 17 Jun 2020 03:19:55 GMT

Hi ,

I try to find Validity period but not found , i already upgrade firware to 200.7.10.202.118 and still not found that . The model AP use is ZoneFlex R500 and R600 .

Should be look like this , but dont know why .

Thanks

Re: Validity Period

syamantakomer — Wed, 17 Jun 2020 10:48:42 GMT

Hi Fakhri,

This is weird because user guide of 200.7 version also says that you should get Validity period option if you choose Guest Access.

Could you follow below and confirm if this fixes the issue.

Access the Unleashed GUI from Google chrome incognito browsing window.
Try to give a name to SSID and then see if option comes back or not.

Regards,
Syamantak Omer

Re: Validity Period

fakhri_mansor — Thu, 18 Jun 2020 06:50:10 GMT

hi Syamantak Omer

Thanks your advice , i already try but still same .

I already solved the issue , i just downgrade to firmware 200.6.10.1.312

Thanks you ,

Best Regards

Re: Validity Period

syamantakomer — Thu, 18 Jun 2020 10:53:11 GMT

Hi Fakhri,

Thank you for reporting this!

We will check this internally if issue is reproducible or not.

Regards,
Syamantak Omer

Re: Validity Period

Daniel_Ferreira — Thu, 09 May 2024 13:45:36 GMT

I have the same problem on the controller: 200.13.6.1.319,
Equipment: R320, I tried the step-by-step guide, but I couldn't, would there be a solution to this problem?