topic Re: Ruckus R510 configure in standalone mode in Access Points - Indoor and Outdoor

Ruckus R510 configure in standalone mode

goh_chee_wong — Tue, 03 Nov 2020 04:00:30 GMT

Dear All Expert,

May I know for Ruckus R510 can configure in standalone mode.

Re: Ruckus R510 configure in standalone mode

philippe_decary — Tue, 03 Nov 2020 04:10:16 GMT

Hi goh_chee_wong,

The following article explains how to convert an AP into Unleashed(Standalone mode)

https://support.ruckuswireless.com/articles/000005720

The following link is the firmware required to flash the Access point to standalone mode

https://support.ruckuswireless.com/software/2713-ruckus-unleashed-ap-200-9-10-4-212-ga-refresh1-software-for-r510

Here is the User Guide how to configure Unleashed(standalone mode).

https://support.ruckuswireless.com/documents/3437-ruckus-unleashed-200-9-ga-user-guide

Best regards,

Re: Ruckus R510 configure in standalone mode

karthik — Tue, 03 Nov 2020 06:42:40 GMT

Yes. R510 if running AP1xx series firmware eg. 114, 110, 108 it can work as standalone with individual CLI and HTTP/S GUI access methods. However, it is intended to be used as intermediate firmware for discovering ZoneDirector or SmartZone controller, or Cloud.

I would suggest you look at the AP firmware 200.x series. This firmware can run an AP as a standalone or cluster of APs. Also provides more features for a standalone AP such as AVC, mobile app, URL filtering, Alexa skills etc.,

Re: Ruckus R510 configure in standalone mode

elvert_bernal — Tue, 03 Nov 2020 08:14:12 GMT

You just need a 200.x version of the ap