topic Possible to use PoE injector instead of AC adapter for T710 in mesh mode? in Access Points - Indoor and Outdoor https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Possible-to-use-PoE-injector-instead-of-AC-adapter-for-T710-in/m-p/15925#M4146 Need to power multiple T710 to use in mesh mode. <BR /><BR /> Don’t have 4-pin AC adapter, but do have correct PoE injector. Can I use injector without data input to power T710 and use in mesh mode? Wed, 11 Jul 2018 19:24:05 GMT tim_pritchard 2018-07-11T19:24:05Z Possible to use PoE injector instead of AC adapter for T710 in mesh mode? https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Possible-to-use-PoE-injector-instead-of-AC-adapter-for-T710-in/m-p/15925#M4146 Need to power multiple T710 to use in mesh mode. <BR /><BR /> Don’t have 4-pin AC adapter, but do have correct PoE injector. Can I use injector without data input to power T710 and use in mesh mode? Wed, 11 Jul 2018 19:24:05 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Possible-to-use-PoE-injector-instead-of-AC-adapter-for-T710-in/m-p/15925#M4146 tim_pritchard 2018-07-11T19:24:05Z Re: Possible to use PoE injector instead of AC adapter for T710 in mesh mode? https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Possible-to-use-PoE-injector-instead-of-AC-adapter-for-T710-in/m-p/15926#M4147 i would say, yes, why not.<BR />we do it on ZF7363<BR />why you dont just try? Wed, 11 Jul 2018 19:29:02 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Possible-to-use-PoE-injector-instead-of-AC-adapter-for-T710-in/m-p/15926#M4147 thomas_fankhaus 2018-07-11T19:29:02Z Re: Possible to use PoE injector instead of AC adapter for T710 in mesh mode? https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Possible-to-use-PoE-injector-instead-of-AC-adapter-for-T710-in/m-p/15927#M4148 In all cases that support Mesh, ZoneDirector, SmartZone, and Unleashed, I recommend to connect and fully configure your intended Mesh APs before deployment in their desired location, and then you should have no problems (using power injector only). Wed, 11 Jul 2018 20:24:32 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/Possible-to-use-PoE-injector-instead-of-AC-adapter-for-T710-in/m-p/15927#M4148 michael_brado 2018-07-11T20:24:32Z