topic ZF7372 Upgradefirmware Loop in Access Points - Indoor and Outdoor

ZF7372 Upgradefirmware Loop

muhammad_ahmed_ — Sat, 12 Jan 2019 16:42:46 GMT

I have
1 x ZD1100 (1112)
10 x ZF7372

Firmwares:

ZD1100: 9.10.2.0.73 (Latest)
4 x ZF7372: 9.10.2.0.73

6x ZF7372: 10.1.1.0.35

I have purchased these 6 AP's from a different person. I suppose he has a ZD1200.

My problem is AP's don't seem to upgradefirmware and keep looping in this state.

ZD log: AP[6c:aa:b3:00:62:40] joins with different firmware/custom file version and is being upgraded.
(This is for all 6 AP's)

I have tried to manually put firmware on AP's but it gives error: bad firmware header magic

Please if some has resolved this issue kindly advise.

Re: ZF7372 Upgradefirmware Loop

krishan_parasha — Mon, 14 Jan 2019 02:28:51 GMT

Upgraded zd firmware 10.x.x

Re: ZF7372 Upgradefirmware Loop

michael_brado — Tue, 15 Jan 2019 23:13:59 GMT

His ZD1100 can't go to 10.x.

Try re-flashing the 7372 model APs, with a Solo image, and then connect for the ZD to see/find/upgrade/configure them.
https://support.ruckuswireless.com/software/1017-zoneflex-solo-access-point-104-0-0-0-1347-ga-softwa...