topic Re: Can't use web interface after upgrading to Ruckus Unleashed 200.8.10.3.278 in Access Points - Indoor and Outdoor

Can't use web interface after upgrading to Ruckus Unleashed 200.8.10.3.278

anton_kuzmin — Wed, 10 Jun 2020 14:51:39 GMT

I upgrade my unleashed network to newest Ruckus Unleashed 200.8.10.3.278 firmware
networks works and upgrade was successful
unfortunately i cant open unleashed dashboard after upgrade. unleashed app works, but with delays. I cant see for example mesh topology in app.
I already tried in Chrome, New Edge and old internet explorer
I can open login page, enter login and password, and nothing happend then...

Re: Can't use web interface after upgrading to Ruckus Unleashed 200.8.10.3.278

michael_brado — Wed, 17 Jun 2020 20:12:18 GMT

Hi Anton,

Have you assigned a single Management IP for the Unleashed network, if so you should be able to reach
the dashboard with that IP address. Else be sure you're wirelessly connected to an Unleashed SSID or on
the same LAN and try https:\\unleashed.ruckuswireless.com. Does that help?

Re: Can't use web interface after upgrading to Ruckus Unleashed 200.8.10.3.278

sanjay_kumar — Fri, 19 Jun 2020 03:27:47 GMT

Hi Anton,

Also, you might need to login to the AP CLI and check the "Master's" IP address with the command "get director", this will ensure that you are accessing the correct IP address on the GUI.