https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/DHCP-with-secondary-network/m-p/13718#M3368 Issue solved. The DHCP configured in the wireless access point will work only once the other DHCP pool from the primary network is full. Thu, 11 Jan 2018 06:30:56 GMT liju_thankachen 2018-01-11T06:30:56Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/DHCP-with-secondary-network/m-p/13717#M3367 we have a ruckus wireless router r500. we have configured DHCP pool  in this access point with secondary network in VLAN1. We have  DHCP server in the primary network of VLAN1. When we connect our device to this accesspoint it will supply IP from the primary network of VLAN1 and not from the pool specified in the Access point. How to get an IP from the range specified in the access point, which is secondary address from VLAN 1.? Wed, 10 Jan 2018 13:23:34 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/DHCP-with-secondary-network/m-p/13717#M3367 liju_thankachen 2018-01-10T13:23:34Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/DHCP-with-secondary-network/m-p/13718#M3368 Issue solved. The DHCP configured in the wireless access point will work only once the other DHCP pool from the primary network is full. Thu, 11 Jan 2018 06:30:56 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/DHCP-with-secondary-network/m-p/13718#M3368 liju_thankachen 2018-01-11T06:30:56Z